Plumbing Blog

Which Type of Garbage Disposal Is Right for Your tacoma Kitchen

While the first garbage disposal was invented in 1927, it wasn’t offered to the general public until 1940. It wasn’t until the middle of the 1970s though, that this kitchen appliance became popular in homes across the United States. There are three basic types and each one provides the same end result.

Continuous Feed Models

This is the most common model found in homes today. Simply turn the water on, turn the machines on, add the waste, and the machine takes care of the rest. Once the waste is gone, turn off the machine, and turn off the water. The switch for this appliance is usually located on the sink or the wall. There is a button on the bottom of the machine that may help undo a jam. This type of disposal is inexpensive and relatively easy to install.

Batch Feed Models

This model works a bit differently. First, add the waste and the water. Next, place the cover on top of the opening. Once the cover is installed correctly, the garbage disposal will start to operate. Remove the cover and the disposal stops. This is a good choice in homes with small children, as the machine cannot be turned on accidentally.

Septic Tank Models

If your home has a septic tank system, this may be a good choice to avoid septic problems later on. It’s basically a continuous feed system, but there are replaceable cartridges used with the disposal. These contain enzymes to break down the waste. The cartridges have to be replaced about every three to six months.

Tips for Using Your Disposal

There are several foods that should never be put into a disposal. These include fibrous foods, such as artichokes and celery. The fibers can become wound around the blades, causing a jam. Seeds from popcorn, apples, peaches, and the like can damage the blades and cause the machine to quit working. Starchy foods, such as potato peelings can cause a build up on the blades, making them less effective. This buildup is also caused by using hot water in the system instead of cold water. Fats and grease will not only coat the blades, but can build up within the plumbing pipes, as well.

You can sharpen the blades of a garbage disposal by putting ice cubes or eggshells in it. Over time, there may be some rather offensive odors that emanate from the machines. A half a cup of baking soda and a bit of water may help, as can a handful of citrus peels. You should avoid putting any type of drain cleaner down a disposal, as this can cause the blades to rust.

Installation

Installation of a garage disposal should only be done by a professional. There are not only plumbing concerns, but electrical considerations, too. A professional can easily install your new disposal and make sure it is working properly.

Comments

Got something to say?

You must be logged in to post a comment.



watersense plumber credit cards


2010 © Hanson Home Services, LLC LLC DBA Rooter-Man. All rights reserved.
Home | Free Consultation | Articles | Terms | Site Map | Privacy


ROOTER-MAN - Service Areas

© Rooter-Man, All Rights Reserved
Rooter-Man
PO Box 732098
Puyallup, WA 98373
Phone: 877-694-5176
Fax: 253-840-2156

License #: ROOT*961LT
* 8 AM TO 5 PM - Monday thru Saturday (except holidays)

Google Reviews
Kudzu | Yelp

Local Plumbing Services
Licensed Plumbers

Plumbing Newsletter | Plumber Services | About A Tacoma Plumbing Company | Drain Cleaning | Plumbing Coupons

Tacoma Plumbers and Plumbing Contractors

Tacoma plumbing contractor and Seattle emergency plumber offers Certified backflow plumbing contractor, installation and testing, Leaky faucet repair / replacement, Dishwasher installation in Federal Way, Ice maker hook-ups, Toilet bowl repair / replacement, New faucet installation Shower diverter repair / replacement Sewer & drain cleaning, Water line repair / replacement, Water heater repair/ replacement, Sewer line repairs, Electronic leak & sewer location, Inline video inspection Garbage disposal repair/replacement, Slab leaks, Floor & wall furnace repair/replacement

King County, WA | Pierce County, WA | Redmond, WA | Puyallup, WA | Sumner, WA | Bonney Lake, WA | Tacoma, WA | Fife, WA | Federal Way, WA | Des Moines, WA | Auburn, WA | Kent, WA | SeaTac, WA | Seattle, WA | Tukwila, WA | Bellevue, WA | Issaquah, WA

Hot Water | Low Water Supply

Seattle Water Heaters

Storage water heaters are by far the most common type of water heater in the U.S. today. Ranging in size from 20 to 80 gallons (or larger) and fueled by electricity, natural gas, propane, or oil, storage water heaters work by heating up water in an insulated tank. When you turn on the hot water tap, hot water is pulled out of the top of the water heater and cold water flows into the bottom to replace it. Because heat is lost through the walls of the storage tank (this is called standby heat loss), energy is consumed even when no hot water is being used. New energy-efficient storage water heaters contain higher levels of insulation around the tank, substantially reducing standby heat loss.

We provide a comprehensive list of other plumbers throughout the United States. If you have ended up on this site and are not in need of a Washington Plumber, please review our other companies that provide emergency plumbing services.

Powered By Footbridge Media: Contractor Directory