Plumbing Blog

Simple Remedies That Will Help Your Tacoma Plumbing Problems

Tacoma Plumbing ProblemsOne of the reasons why you need to hire professional Tacoma plumbers when installing the plumbing system of your house is because a professionally installed system will rarely experience problems. In most cases, it can take years before you start to see some problems with it. The problem that you need to think of is what should be done when you start to see some minor damages in your plumbing system. That is what this article will be showing you. Read on to understand more about the remedies that you can do in order to minimize the problems that you will experience with your plumbing system.

If you start to notice that there is a leaking pipe in your house, the first and most important thing that you need to do is to find where the leak is. Once you’ve found where the problem is, place a mark in its location in order to easily find it when you shut down the water source. You may also want to observe the leaking pipe for a few minutes, and take note of all the details that you have noticed. Write it down in a paper for future use.

Once you are done with this step, the next thing that you need to do is to shut down the source of the water. Keep in mind that some plumbing system use several water sources, and you need to shut everything down in order to stop the leaking pipes temporarily. This will prevent the problem from worsening, and will make it easier for you to clean the mess before you start repairing it.

The next thing that you need to do is to examine the damage more carefully, and try to determine whether it can be solved with a simple application of sealant. Another thing that you may want to check is the nuts that connect the pipes of your plumbing system. Make sure that they are firmly attached. If not, then you may want to use thread seal tape to keep the nuts tightly snugged around the pipes.

If these steps didn’t solve the problem, then it is more likely that you are dealing with a bigger problem that is not visible. For instances like these, the best thing that you can do is to contact professional plumbing services to help you fix your plumbing problems.

Comments

Got something to say?

You must be logged in to post a comment.



watersense plumber credit cards


2010 © Hanson Home Services, LLC LLC DBA Rooter-Man. All rights reserved.
Home | Free Consultation | Articles | Terms | Site Map | Privacy


ROOTER-MAN - Service Areas

© Rooter-Man, All Rights Reserved
Rooter-Man
PO Box 732098
Puyallup, WA 98373
Phone: 877-694-5176
Fax: 253-840-2156

License #: ROOT*961LT
* 8 AM TO 5 PM - Monday thru Saturday (except holidays)

Google Reviews
Kudzu | Yelp

Local Plumbing Services
Licensed Plumbers

Plumbing Newsletter | Plumber Services | About A Tacoma Plumbing Company | Drain Cleaning | Plumbing Coupons

Tacoma Plumbers and Plumbing Contractors

Tacoma plumbing contractor and Seattle emergency plumber offers Certified backflow plumbing contractor, installation and testing, Leaky faucet repair / replacement, Dishwasher installation in Federal Way, Ice maker hook-ups, Toilet bowl repair / replacement, New faucet installation Shower diverter repair / replacement Sewer & drain cleaning, Water line repair / replacement, Water heater repair/ replacement, Sewer line repairs, Electronic leak & sewer location, Inline video inspection Garbage disposal repair/replacement, Slab leaks, Floor & wall furnace repair/replacement

King County, WA | Pierce County, WA | Redmond, WA | Puyallup, WA | Sumner, WA | Bonney Lake, WA | Tacoma, WA | Fife, WA | Federal Way, WA | Des Moines, WA | Auburn, WA | Kent, WA | SeaTac, WA | Seattle, WA | Tukwila, WA | Bellevue, WA | Issaquah, WA

Hot Water | Low Water Supply

Seattle Water Heaters

Storage water heaters are by far the most common type of water heater in the U.S. today. Ranging in size from 20 to 80 gallons (or larger) and fueled by electricity, natural gas, propane, or oil, storage water heaters work by heating up water in an insulated tank. When you turn on the hot water tap, hot water is pulled out of the top of the water heater and cold water flows into the bottom to replace it. Because heat is lost through the walls of the storage tank (this is called standby heat loss), energy is consumed even when no hot water is being used. New energy-efficient storage water heaters contain higher levels of insulation around the tank, substantially reducing standby heat loss.

We provide a comprehensive list of other plumbers throughout the United States. If you have ended up on this site and are not in need of a Washington Plumber, please review our other companies that provide emergency plumbing services.

Powered By Footbridge Media: Contractor Directory