Plumbing Blog

Read Any Good Seattle Water Meters Lately?

Seattle Water MetersKnowing how to read your water meter allows you to easily and quickly track water usage in your Seattle home, including trends and potential spikes due to leaks. If you discover high usage, it would be advisable to contact your Seattle plumber who will be able to find the exact location and repair the leak before your water bill continues to increase needlessly.  Most water meters are one of two types: a straight-reading meter or a dial-reading meter. A straight-reading meter contains a simple number tally that provides the readout, while a dial-reading meter contains either five or six distinct dials that are used to determine the overall usage.



Things You’ll Need

  • Screwdriver

Reading a dial meter

  1. Use a screwdriver to remove the lid of the water pit. Check the area for any dangerous insects     or animals before proceeding.
  2. The dials are labeled in increasing tenth values (i.e. 10, 100, 1000, etc). Begin reading the water meter with the highest value dial, generally the 100,000 dial. Note the smaller of the two numbers nearest to the needle as the first digit.
  3. Read the dial labeled 10,000 and note the smallest of the two numbers nearest to the needle. Continue this procedure until you have read all dials and have a full six-digit number. The final number provides the units of water in either gallons or cubic feet that have been consumed since the meter was installed.
  4. To monitor water usage, simply subtract the “before” reading from the “after” reading and the result will be the amount consumed over a specified period of time. This value can assist with monitoring usage.
  5. If the value given by the readout is in cubic feet, you may want to convert the value to gallons. One cubic foot is equal to 7.48 gallons. As a general rule, water companies will charge you based upon usage in terms of either 100 cubic feet or 1000 gallon units. The best way to know how you are charged is to check your Seattle water bill, which should indicate the unit of measure.

Reading a straight meter


  1. Locate the number tally on the water meter and record the number listed. It is the area that looks similar to a car’s odometer
  2. Determine the unit of measure. It is generally listed as either cubic feet or gallons in the area above or below the number tally.
  3. Subtract the “before” reading from the “after” reading to determine usage.
  4. Convert the value of the readout as needed (between gallons and cubic feet) for consistency with how your Seattle water company bills you for usage.

Tips & Warnings

  • To determine whether or not a leak is present, turn off all of the water outlets in your Seattle home and note the position of the 1-cubic-foot-dial on your water meter. After 30 minutes, check the dial for movement. If the dial has moved, then you have a possible water leak in your home. Call your Seattle plumber for assistance in finding and repairing the leak before your water bill skyrockets.
  • Many new water meters have digital readouts which provide a straight number for consumption and do not require any special techniques for reading.


  • H2ouse: How to Read Your Water Meter
  • “Complete Home Plumbing;” Scott Atkinson; Sunset Books; 2001

Read more:   How to Read a Water Meter |

If you are looking for a Tacoma plumbing contractor, please call 877-694-5176 or complete our online request form.



Got something to say?

You must be logged in to post a comment.

watersense plumber credit cards

© 2010 Rooter-Man of Washington, Inc,
All Rights Reserved
Home | Free Consultation | Articles | Terms | Site Map | Privacy

ROOTER-MAN - Service Areas

© Rooter-Man, All Rights Reserved
17324 87th Ave Ct E
PO Box 732098
Puyallup, WA 98373
Phone: 877-694-5176
Fax: 253-840-2156

License #: ROOT*961LT
* 8 AM TO 5 PM - Monday thru Saturday (except holidays)

Google Reviews | Google Places
Kudzu | Yelp

Local Plumbing Services
Licensed Plumbers

Plumbing Newsletter | Plumber Services | About A Tacoma Plumbing Company | Drain Cleaning | Plumbing Coupons

Tacoma Plumbers and Plumbing Contractors

Tacoma plumbing contractor and Seattle emergency plumber offers Certified backflow plumbing contractor, installation and testing, Leaky faucet repair / replacement, Dishwasher installation in Federal Way, Ice maker hook-ups, Toilet bowl repair / replacement, New faucet installation Shower diverter repair / replacement Sewer & drain cleaning, Water line repair / replacement, Water heater repair/ replacement, Sewer line repairs, Electronic leak & sewer location, Inline video inspection Garbage disposal repair/replacement, Slab leaks, Floor & wall furnace repair/replacement

King County, WA | Pierce County, WA | Redmond, WA | Puyallup, WA | Sumner, WA | Bonney Lake, WA | Tacoma, WA | Fife, WA | Federal Way, WA | Des Moines, WA | Auburn, WA | Kent, WA | SeaTac, WA | Seattle, WA | Tukwila, WA | Bellevue, WA | Issaquah, WA

Hot Water | Low Water Supply

Seattle Water Heaters

Storage water heaters are by far the most common type of water heater in the U.S. today. Ranging in size from 20 to 80 gallons (or larger) and fueled by electricity, natural gas, propane, or oil, storage water heaters work by heating up water in an insulated tank. When you turn on the hot water tap, hot water is pulled out of the top of the water heater and cold water flows into the bottom to replace it. Because heat is lost through the walls of the storage tank (this is called standby heat loss), energy is consumed even when no hot water is being used. New energy-efficient storage water heaters contain higher levels of insulation around the tank, substantially reducing standby heat loss.

We provide a comprehensive list of other plumbers throughout the United States. If you have ended up on this site and are not in need of a Washington Plumber, please review our other companies that provide emergency plumbing services.

Powered By Footbridge Media: Contractor Directory