Plumbing Blog

Be One Step Ahead of Your Seattle Home Inspector

Seattle Plumbing InspectionHere’s a checklist that you can use to do your own pre-inspection on your plumbing. There’s no reason not to check your Seattle home out yourself before you hire a certified home inspector.

This way you can compare notes and ask questions. He will give you a thorough report on the home’s condition. Between what you found and what the inspector found you will be able to take care of what needs to be done before you put your house on the market.

For now we’ll focus on plumbing, including bathrooms, the laundry area, and water and septic systems.

* Look for signs of leaks in exposed pipes, including in areas where pipes run through the walls or foundation.

* Look for signs of corrosion, which could indicate a problem with the water, or with the pipe itself. Are there green stains around brass and copper fittings and on shutoff valves? This is a sign of either corrosion or a reaction that occurs with mismatched metals. If this is left uncorrected, it will cause leaks and bad connections.

* Check water pressure. Low pressure could mean a problem with the line or sediment buildup in the faucet aerator or shower head.

* Check drains for speed of drainage. A slow drain may mean there’s a clog or a blocked vent pipe. Look for a full swirling drain. Bubbling drains are a sign of a problem.

* Flush toilets to make sure they operate as they should. Open their tanks and look for worn or missing parts. Wait around for a few minutes to see if the toilet runs after a while. This is a sign of a slow leak.

* If you have a gas water heater, look inside the burner chamber for rust flakes. Check the flame. It should be an even blue, with no yellow. A yellow flame indicates soot or a problem with the gas-air mixture. The jets may need cleaning.

* You may need help for this next task. It’s a good idea to drain the water heater to remove sediment that has settled to the bottom. If you have an electric water heater, turn it off first or you’ll burn up the heating element.

* Check for cracked tiles in the shower area or around sinks. Tap on tiles to find loose or hollow ones that could be masking rotted backerboard behind them.

* Check on the state of the tub and shower caulking. Is it time to replace it?

* Look for evidence of mildew wherever water has a chance to stand for longer periods of time.

* Check the toilet base to be sure it doesn’t rock. There could be a leak that has damaged the floor around it.

* Look for cracks on the toilet tank or bowl and also on sinks

* Slide shower doors to check for sticking or rust. Examine the gaskets around the door glass for any gaps or tears.

* Turn on the shower and bath faucets to check for leaks around the handles and valves. Are they easy to use, or harder to turn on and off? Check any set screws you see.

* Unscrew the shower head and look for collected sediment. This could be lowering the water pressure.

* Examine vent fans for blockages or dust. If it sounds really loud when you turn them on, the bearings may be worn out or a flapper may have gotten stuck.

* Check washing machine hoses for signs of cracks, brittleness, or leaks.

* Check the dryer vents for tears. Vacuum or brush out lint in the hose and around the lint screen inside the dryer. Look for lint around the floor or on the wall, which indicates there’s a clog in the vent hose.

* If you have your own well for water, send out a sample of your water to your county cooperative extension to test it for chemicals and bacteria.

* Be sure that the well cover is tightly sealed but that there is still access to the pump.

* Check the sump pump by pouring water on it to see if it turns on automatically.

* Look around your septic tank/field for soggy ground or lush vegetation. This may mean the tank is full or failing.

Being familiar with your Seattle home inside and out will give you an advantage when dealing with your home inspector and prospective buyers.

If you determine there are some plumbing issues, get with your Seattle plumbing contractor to take care of any issues and make any plumbing repairs necessary to successfully pass the inspection.

If you are looking for a trustworthy Seattle Home Inspector, please call 877-694-5176 or complete the online request form.

 

Comments

Got something to say?

You must be logged in to post a comment.



watersense plumber credit cards


2010 © Hanson Home Services, LLC LLC DBA Rooter-Man. All rights reserved.
Home | Free Consultation | Articles | Terms | Site Map | Privacy


ROOTER-MAN - Service Areas

© Rooter-Man, All Rights Reserved
Rooter-Man
PO Box 732098
Puyallup, WA 98373
Phone: 877-694-5176
Fax: 253-840-2156

License #: ROOT*961LT
* 8 AM TO 5 PM - Monday thru Saturday (except holidays)

Google Reviews
Kudzu | Yelp

Local Plumbing Services
Licensed Plumbers

Plumbing Newsletter | Plumber Services | About A Tacoma Plumbing Company | Drain Cleaning | Plumbing Coupons

Tacoma Plumbers and Plumbing Contractors

Tacoma plumbing contractor and Seattle emergency plumber offers Certified backflow plumbing contractor, installation and testing, Leaky faucet repair / replacement, Dishwasher installation in Federal Way, Ice maker hook-ups, Toilet bowl repair / replacement, New faucet installation Shower diverter repair / replacement Sewer & drain cleaning, Water line repair / replacement, Water heater repair/ replacement, Sewer line repairs, Electronic leak & sewer location, Inline video inspection Garbage disposal repair/replacement, Slab leaks, Floor & wall furnace repair/replacement

King County, WA | Pierce County, WA | Redmond, WA | Puyallup, WA | Sumner, WA | Bonney Lake, WA | Tacoma, WA | Fife, WA | Federal Way, WA | Des Moines, WA | Auburn, WA | Kent, WA | SeaTac, WA | Seattle, WA | Tukwila, WA | Bellevue, WA | Issaquah, WA

Hot Water | Low Water Supply

Seattle Water Heaters

Storage water heaters are by far the most common type of water heater in the U.S. today. Ranging in size from 20 to 80 gallons (or larger) and fueled by electricity, natural gas, propane, or oil, storage water heaters work by heating up water in an insulated tank. When you turn on the hot water tap, hot water is pulled out of the top of the water heater and cold water flows into the bottom to replace it. Because heat is lost through the walls of the storage tank (this is called standby heat loss), energy is consumed even when no hot water is being used. New energy-efficient storage water heaters contain higher levels of insulation around the tank, substantially reducing standby heat loss.

We provide a comprehensive list of other plumbers throughout the United States. If you have ended up on this site and are not in need of a Washington Plumber, please review our other companies that provide emergency plumbing services.

Powered By Footbridge Media: Contractor Directory