Protecting Your Plumbing in King County

September 15, 2015

Tacoma Plumbing InspectionIf you plan on buying a home in the Washington area, a King County video camera inspection can help as it locates drain blockages. Many new homeowners run into plumbing problems their first time around. This happens as most home inspectors can’t catch them in time.

Your plumbing lines lie deep within and unless you have X-ray vision, you’re not going to see the problems until it is too late. You can have a broken sewer line with running water going through it temporarily and experience problems later.

King County video camera inspections will help you to find these and other well known problems. Your problems will be able to be properly diagnosed using this method as there is no guess work involved in the following areas of the county:

  • Seattle
  • Bellevue
  • Kent
  • Redmond
  • Bothell
  • Kirkland

Video camera inspections is a new plumbing technology that is used in everyday plumbing work. It is a very valuable tool because it is more accurate than anything else. It allows you to know what’s going on inside of your drains and sewer lines. There are lots of problems that a video camera inspection can pinpoint. The inspections work by placing a small, live feed into a pipe. From there you can have a clearer picture of what’s going on deep inside the lines.

Common problems where these camera inspections can seek out are any of the following:

  • Damaged Pipes
  • Blockage
  • Root Infestation
  • Corrosion
  • Leaks

Camera plumbing inspections take all of the guess work out. With instants shots and a full camera display, nothing will be missed. And, you won’t feel as though you’re getting the run around from your plumber. The evidence will be right in front of your face. You’ll be presented with a copy, in most cases, of the problem. This way you’ll have a record of when the problem was brought to your attention and by who.
Root infestations and other plumbing pipe problems can easily be manged with a video camera inspection. It is the fastest way to diagnose your plumbing problems, so there’s less chance of them happening ever again.

You’ll be able to save a lot of money by having this done. You won’t face major drain or sewer line problems in the future nor will you have to think about having a sewer line replacement done.

Call in the King County video camera inspection experts from Rooterman of Washington. They can make your plumbing issues go away with just one call as they are local, fast, and have been in the business for over 30 years.

If you are looking for a King County video camera inspection, please call 877-694-5176 or complete our online request form.

Protect Your Tacoma Plumbing System Through Routine Maintenance

July 24, 2015

Tacoma Plumbing SystemsYou and your family rely on your Tacoma plumbing system for some of your most important everyday tasks. It is hard to imagine getting through a day without using a plumbing fixture or appliance. Because this is such a critical component of you and your family’s everyday lives, it is absolutely imperative that you take the necessary steps to protect and maintain your plumbing system.

The best thing that you can do to ensure that your plumbing system is always operating the best fashion is to hire a professionally licensed plumber to conduct routine maintenance and inspections. In Tacoma, the most qualified and experienced plumbers are at Rooterman of Washington. They can provide you with a wide range of routine inspection and maintenance services that ensure that you always have the most reliable, efficient, and functional plumbing system.

Routine Plumbing Inspections in Tacoma

As a property owner in Tacoma, you have an obligation to properly maintain your plumbing system. At Rooterman of Washington, their highly skilled plumbers can take all of the difficulty out of this responsibility for you. They offer local business owners and homeowners routine plumbing inspection services. After one of these inspections, you can rest assured knowing that your plumbing system is not susceptible to damage or failure and that it is properly maintained.

At these routine inspections, their plumbers will look for signs of water leaks and corrosion. By identifying and repairing minor leaks early, their plumbers save you substantial sums in the form of mitigated repair costs.

Also during their plumbing inspections, their contractors will assess the current condition of all of your plumbing appliances. Their contractors can inspect your water heater, garbage disposal, dish washer and other plumbing appliances to ensure that they are operating in the most efficient, reliable, and effective fashion.

Minor Plumbing Repairs Prevent Major Problems

When you hire the professional plumbers to conduct routine plumbing maintenance for you, you ensure that your plumbing system is always properly maintained. When they inspect your plumbing system, fixtures, and appliances, you can feel confident that minor problems will not become major issues.

By identifying minor leaks and corrosion early, you do not need to worry about a major leak causing significant damage to your Tacoma home or business. By taking preventative measures, you can use your plumbing system without having to worry about stuff failing.

When you develop a relationship with the Tacoma plumbers at Rooterman of Washington, they will be on call to handle all of your major plumbing emergencies. If your preventative measures fail or if you have neglected proper maintenance, you can always call them for emergency plumbing repair service. They are on-call twenty-four hours a day, seven days a week to handle all of your plumbing emergencies.

If you need to hire a professionally licensed plumber in Tacoma, call Rooterman of Washington at 877-694-5176, or fill out our online request form.

Minor and Major Tacoma Plumbing Repairs

July 25, 2013

Tacoma Plumbing RepairsTacoma plumbing repairs are common household projects sometimes done by the homeowner himself if it was only a minor one such as replacement of a faucet gasket, or done by a professional company for a major job such as cleaning a clogged drain.

Notice any leak under the kitchen sink lately? This certainly needs repair as you cannot allow such a defect to go unnoticed. The kitchen should be kept hygienic at all times since this is where meals are prepared. A leak detected, however small, should be fixed at the first instance it is discovered. Although sealants may be available for a quick fix, you will have to observe the sink. If the same issue has occurred several times, then it may need a new water trap that a Tacoma plumbing company can install.

Plumbing repairs also involve finding leaks to water piping in and around the house. More common leaks occur in pipes exposed to outside weather and activity, such as the garden. These leaks can swiftly become big so it is best to have the pipes replaced and protected once installed.

Although it may be a nightmare to see that your toilet does not flush down waste, it may be an indication of a problem with your septic tank. For a problem such as this, a consultation with a Tacoma plumbing company specializing in septic tank cleaning is inevitable. An analysis of the problem will help them determine the best course of action to take. To clean the septic tank is not really a complicated task to implement but it may take time. If this is your case, your options are best discussed with your local plumbing company.

Tackling problems of natural gas pipes are part of Plumbing repairs. To ensure safety, most of these pipes are not repaired but replaced. This is to ensure that the same leak does not recur. As gas is flammable, this delicate issue should not be overlooked. So if any leak is suspected at all, a call to your Tacoma plumbing company for help is a necessity.

Does Tacoma plumbing repairs always refer to fixing a problem? Not necessarily. Sometimes, it can mean reinstallation of existing pipes. For example, a kitchen or a bathroom remodel will typically include the repositioning of items. If the sink or the tub are put in a different area in the kitchen or bathroom, existing pipes will have to be relocated or perhaps new ones will have to be installed to lengthen the piping system to adjust to the remodel.

Moreover, if you are renovating your garden, then you may find yourself needing to install new plumbing for water spray systems and for the drainage of rain water. This can be done by a plumbing company in your area. Plumbing repairs will always be as common as water. But they need not be for a major problem always. In fact, it is best to have only minor ones since a major repair typically means a minor problem left to itself and ignored.

If you are in need of professional Tacoma Plumbing Repairs, please call 877-694-5176 or complete the online request form.

Washington Faucet Repairs: Save Water and Money by Fixing Leaks

November 30, 2012

Washington Plumber - Faucet RepairWhen your Tacoma faucet is leaking, you need to have it immediately fixed. The noise of the dripping water is more than an annoyance – it is the sound of money that is leaking down your faucet. If you have a dripping, broken or leaking faucet, you should quickly get it repaired to prevent yourself from wasting not just water but also money. There are many plumbing professionals and companies that are offering faucets repairs anyway, thus, it could not be difficult for you to stop that annoying drip.

 

You will be swept away at how much water you are wasting from a leaking faucet alone. This can go around 34 to 2,000 gallons per annum depending on the drip severity. That is much water and money! Good thing Rooter Man of Washington faucet repairs are relatively inexpensive. It is easy to call a qualified plumber too.

 

With the availability of the Internet, you can easily locate a Washington Plumber who can fix your faucet. There are many online directories out there, so finding plumbers in your area won’t be a problem at all. Even if the task you need to be done seem like a very simple fixture, you should let it handle by a professional plumber as it is full of complicated seals and valves, making the repairs tricky than they look.

 

Bear in mind that repairing a faucet is a job that is meant for the professionals. It is highly recommended to call a master plumber to discuss your leaking faucet. These people were trained to address leaks or other faucet repairs and problems. They have much experience in addressing broken or leaking faucet.

 

Due to frequent utilization of washers and threads, faucets tend to wear out eventually but they can be replaced easily by professionals. For much severe problems, replacement may not be needed. For experienced plumbers, new installation of faucet can be a breeze. So, regardless of the problem, they are sure to get your bathroom or kitchen working orderly.

 

Bear in mind that leaky bath tub faucets can make you waste much water once dripping begins. Make sure to fix these drips quickly. Also, regularly check exterior spigots because outdoor leaks at times go unnoticed until a major problem occurs (i.e. water in the basement).

 

Contact Rooter Man of Washington plumber for faucet repairs as soon as you encountered a problem. By obtaining professional help, you can be sure to get the best service and workmanship in faucet fixes.

 

If you are looking for reliable Washington Faucet Repairs, please call 877-694-5176 or complete the online request form.

Free Standing or Built-In Jetted Tub?

August 27, 2012

Free Standing Jetting Bathtubs in TacomaWhirlpool bathtubs have been around since the 1960s and until recently have remained unchanged. Although the basic concept of the whirlpool bathtub has remained the same, today’s jetted bathtubs are filled with innovative features and designed to be as aesthetically pleasing as they are comfortable and relaxing.

The basic jetted tub comes in two different forms: the drop in bathtub which has been around since the 1960’s and the free standing jetted bathtub a new innovation that came along in the late 90’s. The free standing bathtub has revolutionized the way people install Jacuzzi style bathtubs. Free standing bathtubs are not technically considered a fixture; the free standing bathtub installation has more in common with a washing machine then a recessed bathtub. They are built atop a stainless steel tubular frame which gives the unit added stability and elevates the unit so it can utilize any existing drain the sits beneath the base. Just based on ease of installation, free standing whirlpool bathtubs have become more popular than their old fashion drop in cousins. Your Seattle plumber can install your free standing whirlpool bathtub easily and efficiently and have you up and running in no time.

Since free standing jetted bathtubs are supported by a tubular frame there is also additional room for features that until recently couldn’t be found in any bathtub. Chromo therapy lighting, FM radio, speakers and waterproof televisions are just a few extras that can be found in today’s free standing jetted bathtubs. Although they may not appeal to everyone, these new futuristic bathtubs have made quite a splash with the tech and gadget crowd.

Technically savvy bathers are not the only ones who gravitate towards the new self-supporting tubs.  Seattle interior designers and builders alike favor them for their ease of installation, low cost and wide variety of designs and styles. Unlike drop in Jacuzzi bathtubs, free standing units don’t just come in a few standard sizes; there are literally thousands of styles ranging from claw foot antique style jetted bathtubs to units inspired by our favorite aquatic life.

Compared to a standard whirlpool bath installation, a free standing jetted bathtub only takes a small fraction of the time, and they are designed for quick and easy remodels. The tubular frame has adjustable feet so the tubs can always be leveled even if your floor is not. The drain stub is also elevated and if there is an existing drain sitting underneath the base of the tub it can be attached easily with a Fernco connection. The water lines are connected via metal braided hoses ( ½” hot and cold). The electrical on free standing bathtubs ranges from unit to unit but many of them can simply be plugged into a standard outlet. The standard installation time for a prepped free standing whirlpool bath is around 15 minutes to an hour.

Overall if you are in the market for a whirlpool jetted bathtub for your Seattle home, you might want to consider a free standing model. You will save money along virtually every part of the process as well as time and frustration. You will also find the selection of models, styles and colors to be superior to the traditional style bathtub.

If you are looking for free standing jetted bathtub installation in Seattle, please call 877-694-5176 or complete the online request form.

Be One Step Ahead of Your Seattle Home Inspector

August 14, 2012

Seattle Plumbing InspectionHere’s a checklist that you can use to do your own pre-inspection on your plumbing. There’s no reason not to check your Seattle home out yourself before you hire a certified home inspector.

This way you can compare notes and ask questions. He will give you a thorough report on the home’s condition. Between what you found and what the inspector found you will be able to take care of what needs to be done before you put your house on the market.

For now we’ll focus on plumbing, including bathrooms, the laundry area, and water and septic systems.

* Look for signs of leaks in exposed pipes, including in areas where pipes run through the walls or foundation.

* Look for signs of corrosion, which could indicate a problem with the water, or with the pipe itself. Are there green stains around brass and copper fittings and on shutoff valves? This is a sign of either corrosion or a reaction that occurs with mismatched metals. If this is left uncorrected, it will cause leaks and bad connections.

* Check water pressure. Low pressure could mean a problem with the line or sediment buildup in the faucet aerator or shower head.

* Check drains for speed of drainage. A slow drain may mean there’s a clog or a blocked vent pipe. Look for a full swirling drain. Bubbling drains are a sign of a problem.

* Flush toilets to make sure they operate as they should. Open their tanks and look for worn or missing parts. Wait around for a few minutes to see if the toilet runs after a while. This is a sign of a slow leak.

* If you have a gas water heater, look inside the burner chamber for rust flakes. Check the flame. It should be an even blue, with no yellow. A yellow flame indicates soot or a problem with the gas-air mixture. The jets may need cleaning.

* You may need help for this next task. It’s a good idea to drain the water heater to remove sediment that has settled to the bottom. If you have an electric water heater, turn it off first or you’ll burn up the heating element.

* Check for cracked tiles in the shower area or around sinks. Tap on tiles to find loose or hollow ones that could be masking rotted backerboard behind them.

* Check on the state of the tub and shower caulking. Is it time to replace it?

* Look for evidence of mildew wherever water has a chance to stand for longer periods of time.

* Check the toilet base to be sure it doesn’t rock. There could be a leak that has damaged the floor around it.

* Look for cracks on the toilet tank or bowl and also on sinks

* Slide shower doors to check for sticking or rust. Examine the gaskets around the door glass for any gaps or tears.

* Turn on the shower and bath faucets to check for leaks around the handles and valves. Are they easy to use, or harder to turn on and off? Check any set screws you see.

* Unscrew the shower head and look for collected sediment. This could be lowering the water pressure.

* Examine vent fans for blockages or dust. If it sounds really loud when you turn them on, the bearings may be worn out or a flapper may have gotten stuck.

* Check washing machine hoses for signs of cracks, brittleness, or leaks.

* Check the dryer vents for tears. Vacuum or brush out lint in the hose and around the lint screen inside the dryer. Look for lint around the floor or on the wall, which indicates there’s a clog in the vent hose.

* If you have your own well for water, send out a sample of your water to your county cooperative extension to test it for chemicals and bacteria.

* Be sure that the well cover is tightly sealed but that there is still access to the pump.

* Check the sump pump by pouring water on it to see if it turns on automatically.

* Look around your septic tank/field for soggy ground or lush vegetation. This may mean the tank is full or failing.

Being familiar with your Seattle home inside and out will give you an advantage when dealing with your home inspector and prospective buyers.

If you determine there are some plumbing issues, get with your Seattle plumbing contractor to take care of any issues and make any plumbing repairs necessary to successfully pass the inspection.

If you are looking for a trustworthy Seattle Home Inspector, please call 877-694-5176 or complete the online request form.

 

Damage Control BEFORE Your Tacoma Plumber Arrives

August 8, 2012

Burst Pipes in TacomaHave you called in for your Tacoma plumber to come fix a water-related plumbing emergency at your home? Plumbing is a field that is best left to the experts since it requires specialized knowledge and equipment. However, there are quite a few things that you could do in order to reduce the damage before the experts arrive.

1. Cut off the water supply: If the problem in your Tacoma home is caused by a burst pipe then you should immediately cut off the water supply to it. While this does not solve the problem, it at least ensures that no additional water enters your home.

2. Remove as much water and debris as you can: There is bound to be a lot of water and debris messing up the floors of your house if you have an overflowing sink or toilet or even a burst pipe. If you do not clear this water away immediately (after shutting off the supply) then it will work its way to the lowest parts of your home, causing a great deal of damage. This might not be a pleasant task, but if you sit around waiting for the plumber to arrive then it is your Tacoma home that will get damaged.

3. Remove furniture that might get damaged: It is a good idea to move carpets, furniture etc. to locations where they cannot come in contact with water. Keep in mind that the repair process might be a very messy one. Also note that your Tacoma plumbers might track unsanitary material into your home without meaning to. It might not be possible to remove carpets leading up to the room where they will work. If so, you should at least place mats or newspapers on them.

4. Clear the work area: Remove toiletries, potted plants etc. from the bathroom counter so that the plumbers can work easily. The same applies to kitchens where the countertops might have equipment and utensils. Not only will this make the plumber’s job easier but it will help prevent these objects getting contaminated by dirty water.

5. Keep kids and pets out of the way: Repair work will happen easily if there are no kids or pets getting in the way. It is best to keep them engaged in a separate part of the house so that no disruptions occur.

You will be able to get the best possible work out of your Tacoma plumbers as long as you do these things.

Find out what you need to do while you wait for plumbers in Tacoma to arrive to fix a problem. These tips will help you restrict damage to your property and reduce the time that the workers spend in your home.

If you are looking for an experienced Tacoma Plumber, please call 877-694-5176 or complete the online request form.

Your Plumbing Needs to Vent Too!

August 2, 2012

Seattle Plumbing VentsPlumbing Vents in Seattle

plumbing vent is basically a special pipe (or network of pipes) that leads from an appliance located inside your Seattle home to the outside of your home. Although not always, many of these will lead to the roof. Also, many vent pipes are comprised of more than one pipe. So what purpose does a vent serve with regard to your plumbing?

What Do They Do

Unlike the other pipes in your system, vent pipes do not carry water. Instead they carry sewer gases safely from the inside of your home to the outside environment. This is an extremely important part of your Seattle home plumbing. Residents should always ensure these vents are in good working order. Should you suspect they are not in good working order, it would be wise to contact your Seattle plumber immediately.

Sewer Gases

Sewer gas can make you very sick. Without these vent pipes, these gases would build up in the system and eventually emanate out of your drains and taps and into your Seattle home. The vents allow the gases to escape so they won’t build up.

As you can see, vents are an essential part of your plumbing. Seattle community residents are required to maintain working plumbing vents for each of their appliances in order to comply with local and state building codes.

If you are looking for a highly skilled and experienced Tacoma plumbing contractor, please call 877-694-5176 or complete the online request form to schedule an appointment today.

Dealing with Clogged Drains in Your Seattle Home

July 26, 2012

Clogged DrainsOne of the most common Seattle plumbing problems in most homes is clogged drains. This is something that must not be ignored, or else, you will be faced with bigger problems, especially with the internal structures and on your pipelines. While calling a plumber may be the first thing that will come to your mind when it comes to this ordeal, you can opt to deal with the situation on your own if the problem appears to be manageable.

What to do?

You can deal with clogged drains by applying a technique that works most of the time. Here’s what you ought to do. Start performing the task if there is standing water. If there is none, you can opt to pour water into the area where the problem appears. The drains and air vents must be sealed. You can put the suction cup of your plunger on the drain until you are quite certain that everything has been covered.

You have to exert effort in pushing and pulling that suction. You have to remember that you are doing this for the clog to move. After several times of pushing and pulling, you can remove the plunger. You simply have to observe at this point if the water is already going down the drain quite easily. If there still seems to be a problem, no matter how minor it is, you simply have to repeat using the plunger until the problem is completely solved.

Checking Various Parts of Your Home

There are vital parts of your home that you need to regularly check for clogged drains. This is important in order to save water and save yourself from spending too much on replacing damaged pipelines and other fixture.

For the sink on your bathroom and kitchen, you must first make sure that all the air holes are covered with duct tape or cloth. Use the plunger as instructed above. While many homeowners opt to use expensive cleaning agents, it is best that you first try fixing the problem with a plunger in order to save some bucks in the task.

If the problem with clogged drains happened on your bathtub, you must first pull off the overflow cover plate. You can then put a rag onto the hole and start plunging the drain. For the showers, since there are no air holes that you need to cover, you can simply proceed in plunging the drain.

If you are looking for a professional Seattle plumber to fix Clogged Drains, please call 877-694-5176 or complete the online request form to schedule an appointment today.

If Your Plumbing is Louder Than Your Kids…

July 2, 2012

Seattle Plumbing RepairTo diagnose noisy plumbing in your Seattle home, it is important to determine first whether the unwanted sounds occur on the system’s inlet side-in other words, when water is turned on-or on the drain side. Noises on the inlet side of plumbing have varied causes: excessive water pressure, worn valve and faucet parts, improperly connected pumps or other appliances, incorrectly placed pipe fasteners, and plumbing runs containing too many tight bends or other restrictions. Noises on the drain side usually stem from poor location or, as with some inlet side noise, a layout containing tight bends.

Hissing

Hissing noise that occurs when a faucet is opened slightly generally signals excessive water pressure. Consult your Seattle water company if you suspect this problem; they will be able to tell you the water pressure in your area and they can install a pressure reducing valve on the incoming water supply pipe if necessary.

Thudding

Thudding noises, often accompanied by shuddering pipes, when a faucet or appliance valve is turned off is a condition called water hammer. The noise and vibration are caused by the reverberating wave of pressure in the water, which suddenly has no place to go. Sometimes opening a valve that discharges water quickly into a section of piping containing a restriction, elbow, or tee fitting can produce the same condition.

Water hammer can usually be cured by installing fittings called air chambers or shock absorbers in the plumbing to which the problem valves or faucets are connected. These devices allow the shock wave created by the halted flow of water to dissipate in the air they contain, which (unlike water) is compressible.

Older Seattle plumbing systems may have short vertical sections of capped pipe behind walls on faucet runs for the same purpose; these can eventually fill with water, reducing or destroying their effectiveness. The cure is to drain the water system completely by shutting off the main water supply valve and opening all faucets. Then open the main supply valve and close the faucets one at a time, starting with the faucet nearest the valve and ending with the one farthest away.

Chattering or Screeching

Intense chattering or screeching that occurs when a valve or faucet is turned on, and that usually disappears when the fitting is opened fully, signals loose or defective internal parts. The solution is to replace the valve or faucet with a new one.

Pumps and appliances such as washing machines and dishwashers can transfer motor noise to pipes if they are improperly connected. Link such items to plumbing with plastic or rubber hoses (never rigid pipe-to isolate them.)

Other Inlet Side Noises

Creaking, squeaking, scratching, snapping, and tapping usually are caused by the expansion or contraction of pipes, generally copper ones supplying hot water. The sounds occur as the pipes slide against loose fasteners or strike the nearby framing of your Seattle home. You can often pinpoint the location of the problem if the pipes are exposed; just follow the sound when the pipes are making noise. Most likely you will discover a loose pipe hanger or an area where pipes lie so close to floor joists or other framing pieces that they clatter against them. Attaching foam pipe insulation around the pipes at the point of contact should remedy the problem. Be sure straps and hangers are secure and provide adequate support.

Where possible, pipe fasteners should be attached to massive structural elements such as foundation walls instead of to framing; doing so lessens the transmission of vibrations from plumbing to surfaces that can amplify and transfer them. If attaching fasteners to framing is unavoidable, wrap pipes with insulation or other resilient material where they contact fasteners, and sandwich the ends of new fasteners between rubber washers when installing them.

Correcting plumbing runs that suffer from flow-restricting tight or numerous bends is a last resort that should be undertaken only after consulting a skilled Seattle plumbing contractor. Unfortunately, this situation is fairly common in older Seattle homes that may not have been built with indoor plumbing or that have seen several remodels, especially by amateurs.

Drainpipe Noise

On the drain side of plumbing, the chief goals are to eliminate surfaces that can be struck by falling or rushing water and to insulate pipes to contain unavoidable sounds.

In new construction, bathtubs, shower stalls, toilets, and wall-mounted sinks and basins should be set on or against resilient underlayments to reduce the transmission of sound through them. Water-saving toilets and faucets are less noisy than conventional models; install them instead of older types even if Seattle codes still permit using older fixtures.

Drainpipes that do not run vertically to the basement or that branch into horizontal pipe runs supported at floor joists or other framing present particularly troublesome noise problems. Such pipes are large enough to radiate considerable vibration; they also carry significant amounts of water, which makes the situation worse. In new construction, specify cast-iron soil pipes (the large pipes that drain toilets) if you can afford them. Their massiveness contains much of the noise made by water passing through them.

Also, avoid routing drainpipes in walls shared with bedrooms and rooms where people gather. Walls containing drainpipes should be soundproofed as was described earlier, using double panels of sound-insulating fiberboard and wallboard. Pipes themselves can be wrapped with special fiberglass insulation made for the purpose; such pipes have an impervious vinyl skin (sometimes containing lead). Results are not always satisfactory.

Click here or call 877-694-5176 to schedule an appointment.

Next Page »



watersense plumber credit cards


2010 © Hanson Home Services, LLC LLC DBA Rooter-Man. All rights reserved.
Home | Free Consultation | Articles | Terms | Site Map | Privacy


ROOTER-MAN - Service Areas

© Rooter-Man, All Rights Reserved
Rooter-Man
PO Box 732098
Puyallup, WA 98373
Phone: 877-694-5176
Fax: 253-840-2156

License #: ROOT*961LT
* 8 AM TO 5 PM - Monday thru Saturday (except holidays)

Google Reviews | Google Places
Kudzu | Yelp

Local Plumbing Services
Licensed Plumbers

Plumbing Newsletter | Plumber Services | About A Tacoma Plumbing Company | Drain Cleaning | Plumbing Coupons

Tacoma Plumbers and Plumbing Contractors

Tacoma plumbing contractor and Seattle emergency plumber offers Certified backflow plumbing contractor, installation and testing, Leaky faucet repair / replacement, Dishwasher installation in Federal Way, Ice maker hook-ups, Toilet bowl repair / replacement, New faucet installation Shower diverter repair / replacement Sewer & drain cleaning, Water line repair / replacement, Water heater repair/ replacement, Sewer line repairs, Electronic leak & sewer location, Inline video inspection Garbage disposal repair/replacement, Slab leaks, Floor & wall furnace repair/replacement

King County, WA | Pierce County, WA | Redmond, WA | Puyallup, WA | Sumner, WA | Bonney Lake, WA | Tacoma, WA | Fife, WA | Federal Way, WA | Des Moines, WA | Auburn, WA | Kent, WA | SeaTac, WA | Seattle, WA | Tukwila, WA | Bellevue, WA | Issaquah, WA

Hot Water | Low Water Supply

Seattle Water Heaters

Storage water heaters are by far the most common type of water heater in the U.S. today. Ranging in size from 20 to 80 gallons (or larger) and fueled by electricity, natural gas, propane, or oil, storage water heaters work by heating up water in an insulated tank. When you turn on the hot water tap, hot water is pulled out of the top of the water heater and cold water flows into the bottom to replace it. Because heat is lost through the walls of the storage tank (this is called standby heat loss), energy is consumed even when no hot water is being used. New energy-efficient storage water heaters contain higher levels of insulation around the tank, substantially reducing standby heat loss.

We provide a comprehensive list of other plumbers throughout the United States. If you have ended up on this site and are not in need of a Washington Plumber, please review our other companies that provide emergency plumbing services.

Powered By Footbridge Media: Contractor Directory